PATON StandardCUT-100 400V plasma cutter


Add to watch
Add to watch
  • Supply voltage: 3x400V, 50 Hz
  • Work cycle: 50% at 100A, 100% at 70A
  • Cutting current adjustment range: 35-100A
  • Maximum thickness of metal to be cut: 35mm
  • Description: High-quality plasma cutting machine for high-precision cuts in metals of varying textures and thicknesses. The machine is characterised by quality workmanship, high productivity and many modern features that guarantee the highest quality.

Did you like this product? Add to favorites now and follow the product.

Add to watch
Add to watch


The Paton StandardCUT-100 inverter plasma cutter is designed for the manual cutting of metals and alloys by means of plasma arc in an air stream, enabling high-precision cuts to be made in metals of various textures and thicknesses up to 35 mm. The “Standard” series is powered by a three-phase 400V mains supply and combines high power with ease of use and small dimensions. Due to the increased frequency of the inverter, the unit has a lower weight and size compared to classic cut-off machines. The unit is equipped with a protective system in the event of insufficient air pressure, as well as a pneumatic system with two valves – for gentle arc ignition with reduced metal spatter and to extend the service life of the plasma torch consumables.


  • Peak overload protection system
  • Inverter IGBT technology
  • Three-phase connection that does not require a neutral conductor
  • Adaptive cooling
  • Convenient and simple operation
  • 50% duty cycle at 100A, 100% at 70A
  • Increased unit reliability in dusty environments
  • Thermal protection on all hot components
  • Infinitely variable current adjustment
  • Dual valve pneumatic system
  • Plasma cutter StandardCUT-100 400V
  • Ground cable 3m
  • Pneumatic quick-release coupling


Rated mains voltage 3x400V, 50 Hz
Rated current consumption 20 A
Rated cutting current 100 A
Duty cycle 50% at 100A
100% at 70A
Supply voltage range 360 – 420 V
Cutting current adjustment range 35 – 100 A
Maximum thickness of cut metal 35 mm
Working air pressure range 0.48 – 0.7 MPa
Air flow rate no less than 180 l/min
Non-contact ignition (oscillator) Yes
Pilot arc Yes
Plasma ignition voltage 270 – 310 V
Rated power consumption 13.2 kVA
Maximum power consumption 16.5 kVA
Efficiency 90%
Forced cooling
Operating temperature range -25 … +45ºС
Overall dimensions (L x W x H) 560 x 225 x 440 mm
Weight 25,8 kg
Degree of protection IP 23